Most important references in 2016

• Client: NSW
  Cable laying with own cable laying barge „NOSTAG 10“ at OWP Nordergründe.
  PLGR, general assistance and anchor handling with our FlatTop Tug “Torsten”.

• Client: Enercon
  Transport of wind turbine parts with own tug and pontoon.

• Client: Elos Spedition
  Transport of a portal crane within port of Bremen with own tug and pontoon.

• Client: Martens en Van Oord (Subcontractor to ARGE Neubau 5. Schleusenkammer Brunsbüttel)
  Transport of excavated soil from Brunsbuettel (construction of the new lock chamber) to Dyhrrsenmoor.

• Client: Matthäi Wasserbau
  Handling of barges in Lübeck.

• Client: ARGE Neubau 5. Schleusenkammer Brunsbüttel
  Transport of vehicles and personnel from shore to site within the scope of the new building of the 5th lock chamber in Brunsbüttel

• Client: Deme Group / GeoSea
  Provision of an assistance tug as well as runner crew for 46 calls of Kiel-Canal (Elbe p/s – Kiel LH and vice versa)

Most important references in 2015

• Project: Onshore WP components
  
  Transport of 3x E-70/4 WEC and 3x Steel Tower E-70 with a barge and two tugs from Emden and Malmö to Föhr. Stability, load out / load in, vessel coordination, custom clearance.
  Client: Enercon

• Project: KFE / BorWin 3/ DolWin 3
  
  Cable laying with own cable laying barge „NOSTAG 10“ at OWP KFE, Borwin 3 and Dolwin 3. Assistance and anchor handling with our multicat “TORSTEN”. 
  Client: Bohlen & Doyen

Most important references in 2014

• Project: OWP Nordsee Ost
  Transport of 48 x 6M nacelles and hubs with a barge and tugboat from Bremerhaven LH to Bremerhaven CT1. Design of seafastening, cribbing, stability, load out / load in, vessel coordination, custom clearance
  Client: Senvion
• Project: Onshore WP Dagebüll
  Transport of 4 x 6.2M wind turbines (hub, nacelles, lower and upper tower sections) with a barge and two tugs from Cuxhaven and Bremerhaven to Dagebüll. Design of seafastening, cribbing, stability, load out / load in, vessel coordination, custom clearance
  Client: Senvion

Most important references in 2013

• July: OWP “West of Duddon Sands” / Irish Sea
  Working as assistance for cable laying barge “STEMAT 89” and “STEMAT SPIRIT” , e.g. anchor handling, transfers
  Client: Stemat / VSMC

• June: DolWin Alpha / BorWin Alpha
  ROV-Survey at DolWin Alpha / BorWin Alpha platforms, measurements with a multibeam echosounder
  Client: Vermessungsbüro Weigt

• May-June: Assistance EIDERBARGE 42 für Transportlogistik-Projekt "Thornton Bank III"
  Assistance at River Weser and River Elbe, as well as harbor assistance at the port of Bremerhaven and Cuxhaven.
  Client: REpower Systems SE
• May: Towage EIDERBARGE 42
  Towage of “EIDEBARGE 45” from Kiel / Germany to Hoydalsbygd / Norway. 
  Client: Nobiskrug GmbH
• Serveral assistances at the Kiel-Canal
  Working as assistance tug at the Kiel-Canal and on the river Elbe/ Kiel Fjord, e.g. tug “JADE” with pontoon “STRALSUND”
• January-March: Deconstruction of platform “Manslagt Z1”
  Deconstruction of the gas platform “Manslagt Z1” with jack up barge “ODIN”. Towage and positioning of jack up barge “ODIN”, transport of equipment and crew transfer, anchor handling, towage of working pontoons.
  Client: HOCHTIEF Solutions AG / Exxon Mobil

Most important references in 2012

• Transports Scotland
  Transport of 3 pontoons and three barges from Germany to Edinburgh, Scotland
  Client: Colcrete-von-Essen
• Cable connection Offshore Windpark Borkum West 2
  Assistance and anchorhandling with two tugs (TORSTEN & MAX) for cable laying with NOSTAG 10
• August till November: OWP “Borkum West II”
  Working as assistance for cable laying barge “NOSTAG 10” at OWP “Borkum West 2”, e.g. anchor handling
  Client: NSW – Norddeutsche Seekabelwerke GmbH
• May till July: OWP "Baltic 2"
  Working as assistance for cable laying barge “NOSTAG 10” at OWP “Baltic 2”, e.g. initiation of ROV-trencher, anchor handling.
  Client: NSW – Norddeutsche Seekabelwerke GmbH
• April: Tug TORSTEN
  Commissioning at Sanmar Shipyard/ Turkey; mobilization to Brunsbüttel.

Most important references in 2011

• Cable connection Wales - Irland
  Laying of cables between Wales and Ireland with a total length of 36.5 km with the cable-laying barge NOSTAG 10 and the tugs MAX and MORITZ
  Client: EireGrid/ABB
• 2nd part OWP Rödsand 2, Baltic Sea
  The internal wiring Park was carried out with our cable-laying barge NOSTAG 10. We were responsible for the provision of cable applicant, the marine crew, the tug and for navigational advice
  Client: E.ON

Further significant references

• 2009 Cable connection Helgoland, Northsea
  The cable laying work for the network connection of the island of Helgoland was carried out with our cable ship NOSTAG10 with a total cable length of 53 km to St. Peter-Ording. We were responsible for the provision of cable applicant, the marine crew, the tug and for navigational advice.
  Client: E.ON
• 2008   Landing of a second submarine cable for Norderney based on a „Zero introductory ­concept“
  Conversion of standard barges to noiseless cable ferries
  Cooperation: Hans Schramm, NavConsult
  Client: TAGU Tiefbau Unterweser
• 2008     Revision of an underwater research facility
  Under observance to the traffic on the Baltic Sea Construction of a platform with four-point mooring system, accommodation for the team, decompression chamber, diving entry point.
  Client: Public authorities
• 2008     Offshore Cable Norddeich/Norderney, Northsea
  The cable-laying took place in the Wadden Sea area 1 and was carried out with our own tractors and P1 pontoon. We were responsible for the warm-up of the pontoons and beaching of the pontoons. This outstanding maritime skills for tidal waters and tightest maneuvers of the crews of the tugs were required. The implementation of non-motor-driven water transport has been developed in advance by us, designed and installed by us on site. In addition, we were responsible for maritime consultancy.
  Client: NSW – Norddeutsche Seekabel Werke
• 2005/2006     Pipeline building Mittelplate A, Northsea
  In this project we have equipped the renovation and equipping of 12 catamaran pontoons to units for drilling and to some extent with our own tugs between Brunsbüttel, Cuxhaven and the offshore location abducted position and ballasted.
  Client: RWE-Dea AG/Wintershall
• 1996-2006 Mittelplate A, Northsea
  Year-round transportation of wet oil by means of two tank barges from the „Mittelplate A“ in the German Bight to Brunsbüttel Oilport.
  Client: RWE-Dea AG